1.Please have experienced and qualified professionals to carry out construction and installation. When installing, the faucet should try not to bump with hard objects. Do not leave cement, glue, etc. on the surface to avoid damage to the surface coating. Be careful to remove the debris from the pipe and install the faucet.
2.In the case that the water pressure is not less than 0.02mpa (ie 0.2kgf/cm2), after using for a period of time, if the amount of water is found to decrease, or even the water heater is turned off, it can be lightly at the outlet of the faucet. Lightly unscrew the screen cover to remove impurities, which can generally be restored.
3.Switch faucet should not use too much force, gently turn around. Even a traditional faucet does not require a lot of effort to screw it. In particular, do not use the handle as a handrail to support or use it.
4.The shower head metal hose of the bathtub faucet should be kept in a natural stretch state. Do not coil it on the faucet when not in use. At the same time, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
5.The ideal cleaning technique is to rinse the faucet with water, and then use soft cotton cloth to dry all the moisture on the metal surface of the faucet, because the water will volatilize on the metal surface. Wipe gently and do not rub hard. Dry with a damp sponge and soft leather to make the faucet shine.
6.It is best to use a mild liquid glass cleaner, or an acid-free, non-abrasive soft liquid and a completely dissolved powder. A non-abrasive solution polish removes the thick mask and deposits on the faucet. Do not use any A friction cleaner, cloth or paper cloth, and any acid-containing cleaners, polishing abrasives, or harsh cleaners.